Chapter 7: Technical specifications
This appendix lists the electrical specifications for the 8004DC and 8005DC power supplies.
Model 8004DC power supply
This section provides power ratings for the 8004DC input and output power supplies.
DC input power specifications
Table 4: DC input power specifications for Model 8004DC power supply
the technical specifications for DC input power for Model 8004DC power supply.
Important:
The 8010co equipment shelf load and the 8004DC power rating are limited to 732 W for
each power supply when the power supply is configured with the 8010co BIP. Electrical code
compliance requires this limitation because of the difference between the 8010co BIP output
circuit protection rating of 30 A and the 8004DC power supply input current rating of 29 A
at –48 VDC nominal operating condition.
Table 4: DC input power specifications for Model 8004DC power supply
Input voltage
Input current
Input VA
Input power consumption
Heat dissipation (thermal/output)
DC output power specifications
Table 5: DC output power specifications for Model 8004DC power supply
describes the technical specifications for DC output power for Model 8004DC power supply.
Installation — DC Power Supply
Parameter
on page 63 describes
Specifications
– 48 VDC
29 A
1.4 kVA
1392 W
1850 Btu/hr
September 2012
on page 64
63