DC power supply installation
Figure 10: Removing a power filler panel: 8006 and 8010 chassis
Figure 11: Removing a power filler panel: 8003-R chassis
Installing the DC power supply
Install the DC power supply to the DC input power source of the Avaya Ethernet Routing Switch
8800/8600.
Use the following procedure to install the DC power supply.
Voltage:
Risk of electric shock
Before working on this equipment, be aware of proper safety practices and the hazards
involved with electrical circuits. Use only power cords that have a grounding path. Ensure
the switch is properly grounded before powering on the unit.
40
Installation — DC Power Supply
Comments? infodev@avaya.com
September 2012