8005DC power supply
Each 8005DC power supply provides 1462 W of power to the switch.
supply
on page 25 shows the 8005DC power supply used in the 8003-R, 8006, 8010, and
8010co chassis.
Figure 2: 8005DC power supply
Minimum number of 8005DC power supplies to install
To configure an Ethernet Routing Switch 8800/8600 system, consider the total power
consumption to ensure proper system performance.
The total input power consumption of the components (modules and fan trays or cooling
modules) must not exceed the 8005DC power supply rating.
To determine the minimum number of power supplies to install for the Ethernet Routing Switch
8800/8600 system, see
page 34.
Redundant power configuration
If a chassis has a redundant power configuration and one power supply fails, the chassis
continues to operate with no interruption of service. The chassis continues to supply the same
module output power with the remaining power supplies. A trap and syslog message indicates
that the configuration is non-redundant. Avaya recommends that you operate the Ethernet
Installation — DC Power Supply
Determining the minimum number of DC power supplies
8005DC power supply
Figure 2: 8005DC power
on
September 2012
25