Cleaning and caring for the unit
Prerequisite Unit disconnected from the electric supply mains
6.14 Inspecting the unit
6.14.1 Performing a visual inspection
NOTICE
Prerequisite Unit disconnected from the electric supply mains
6.14.2 Running CombiDoctor (self-diagnostic program)
INFORMATION
70
Removing the air diverter
1. Remove core temperature sensor from holder.
2. Remove right and left support racks.
3. Use tool to remove water supply pipe.
4. Use tool to remove upper fasteners.
5. Use tool to remove lower fasteners.
6. Remove the air diverter from the pins.
Installing the air diverter
1. Place the air diverter on the pins.
2. Use tool to close upper fastener.
3. Use tool to close lower fasteners.
4. Use tool to install water supply pipe.
5. Insert right and left support racks.
6. Insert core temperature sensor into holder.
Risk of property damage from improper inspection
• Inspect in accordance with the inspection intervals.
• Have inspections performed by a capable user.
• In the event of damage or signs of wear, contact customer service immedi-
ately and stop using the unit.
Unit empty and cleaned
Cooking chamber door opened completely
Inspect housing, cooking chamber door and cooking chamber
yearly for deformation and damage.
Visual inspection has been performed.
Incorrect results are displayed when the unit is warm. Allow the unit to cool
down.
Operating instructions