At+Cpin Enter Pin - Siemens TC37 Module At Command Reference

AT Command Set

4.31 AT+CPIN Enter PIN

Test command Response
OK
AT+CPIN=?
Read command Response
AT+CPIN? TA returns an alphanumeric string indicating whether or not a password is
required.
+CPIN: <code> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<code>
TC3X_ATC_01_V04.00
SIM PIN authentication
READY PIN has already been entered. No further entry
needed.
SIM PIN ME is waiting for SIM PIN1.
SIM PUK ME is waiting for SIM PUK1 if PIN1 was
disabled after three failed attempts to enter
PIN1.
SIM PIN2 ME is waiting for PIN2, when the attempt to
access PIN2 requiring features was
acknowledged with +CME ERROR:17 (e.g. if
client attempts to edit the FD phonebook).
SIM PUK2 ME is waiting for PUK2 to unblock a disabled
PIN2. Necessary if preceding command was
acknowledged with error +CME ERROR:18.
Phone security locks set by client or factory
PH-SIM PIN ME is waiting for phone-to-SIM card password if
"PS" lock is active and user inserts other SIM
card than the one used for the lock. ("PS" lock is
also referred to as phone or antitheft lock).
PH-SIM PUK ME is waiting for Master Phone Code, if the
above "PS" lock password was incorrectly
entered three times.
Factory set SIM locks
PH-FSIM PIN ME is waiting for phone-to-very-first-SIM card.
Necessary when "PF" lock was set. When
powered up the first time, ME locks itself to the
first SIM card put into the card holder. As a
result, operation of the mobile is restricted to this
one SIM card (unless the PH-FSIM PUK is used
as described below).
PH-FSIM PUK ME is waiting for phone-to-very-first-SIM card
unblocking password to be given. Necessary
when "PF" lock is active and other than first SIM
card is inserted.
Page 96 of 204 29.05.2002