AT Command Set
3.25 AT+FTM Transmit Data
Test command
Response
AT+FTM=?
(List of supported modulation modes) OK
Parameter
See write command
Write command
This command causes the TA to transmit data using the modulation mode
defined below. An ERROR response code results if this command is issued while
AT+FTM=<mod>
the modem is on-hook.
Response
CONNECT
If error is related to ME functionality:
ERROR
Parameter
<mod>
Reference
Note
TIA/EIA-578
Used for Fax class 1 only
3.26 AT+FTS Stop Transmission and Wait
Write command
This command causes the TA to terminate a transmission and wait for <time> 10
millisecond intervals before responding with the OK result code to the DTE.
AT+FTS=<time>
Response
An ERROR response code results if this command is issued while the modem is
on-hook.
Parameter
<time>
Reference
Note
TIA/EIA-578
Used for Fax class 1 only
TC3X_ATC_01_V04.00
modulation mode
96
V.29
9600 bps
72
V.29
7200 bps
48
V.27ter
4800 bps
24
V.27ter
2400 bps
0 – 85
no. of 10 millisecond intervals
Page 55 of 204
29.05.2002