AT Command Set
3.13 AT+FET End a page or document
Write command
This command indicates that the current page or partial page is complete. An
ERROR response code results if this command is issued while the mode is on-
AT+FET=<ppm>
hook.
Response
OK
Parameter
<ppm>
Reference
Note
EIA PN-2388
Used for Faxclass 2 only
3.14 AT+FK Kill operation, orderly FAX abort
Execute command
This command causes the TA to terminate the session in an orderly manner.
AT+FK
Response
OK
Reference
Note
Used for Faxclass 2 only
3.15 AT+FLID Query or set the Local Id setting capabilities
Test command
Response
(max. character length of Local ID string) (range of supported ASCII character
AT+FLID =?
values) OK
Parameter
See write command
Read command
Response
< lid > OK
AT+FLID?
Parameter
See write command
Write command
Response
OK
AT+FLID =<lid>
Parameter
<lid>
Reference
Note
EIA PN-2388
See also "AT+FCIG Query or set the Local polling id ", pg. 44.
Used for Faxclass 2 only
TC3X_ATC_01_V04.00
Post Page Message Codes
1 another document next
2 no more pages or documents
4 another page, procedure interrupt
5 another document, procedure interrupt
Local ID string, max. length and possible content as reported by test
command. Default value is empty string ("").
Page 51 of 204
29.05.2002