At+Cpbs Select Phonebook Memory Storage - Siemens TC37 Module At Command Reference

AT Command Set

4.29 AT+CPBS Select phonebook memory storage

Test command Response
+CPBS: (list of supported <storage>s ) OK
AT+CPBS=?
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command
Read command Response
AT+CPBS? TA returns currently selected memory:
+CPBS: <storage>,<used>,<total> OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command
Write command Response
AT+CPBS= TA selects current phonebook memory storage, which is used by other
<storage> phonebook commands.
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<storage>
<used>
<total>
Reference Note
GSM 07.07 This command can be used right after power-on to get selected <storage>.
Since data need to be loaded from the SIM, values of <used> and <total> might
not be available for the first 20 seconds.
TC3X_ATC_01_V04.00
"SM" SIM phonebook (storage depends on SIM Card)
"FD" SIM fixdialling phonebook (FD Phonebook storage pos.1-7).
If the mobile is locked to FD, only the numbers stored to the
FD memory can be dialled. To edit the FD phonebook PIN 2
is required. See AT+CLCK Facility lock and AT^SLCK
Facility lock.
"LD" SIM last-dialling-phonebook (LD Phonebook storage pos.1-
10) (+CPBW not be applicable to this storage)
"MC" ME missed (unanswered received) calls) (MC Phonebook
storage pos.1-10) list (+CPBW not applicable to this storage
"RC" ME received calls list (+CPBW not applicable for this
storage) (RC Phonebook storage pos.1-10)
"ON" SIM (or ME) own numbers (MSISDNs) list
"ME" ME Phonebook (storage pos.1-50)
Integer type value indicating the number of used locations in
selected memory
Integer type value indicating the maximum number of locations
allowed in the selected memory
Page 94 of 204 29.05.2002