At+Clip Calling Line Identification Presentation - Siemens TC37 Module At Command Reference

AT Command Set

4.19 AT+CLIP Calling line identification presentation

Test command This command refers to the GSM supplementary service CLIP (Calling Line
Identification Presentation) that enables a called subscriber to get the calling line
AT+CLIP=?
identity (CLI) of the calling party when receiving a mobile terminated call.
Response
+ CLIP: (list of supported <n>s) OK
Parameter
See write command
Read command Response
+CLIP: <n>, <m> OK
AT+CLIP?
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
See write command
Write command Set command enables or disables the presentation of the CLI at the TE. It has no
effect on the execution of the supplementary service CLIP in the network.
AT+CLIP=<n>
Response
OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<n>
<m>
Unsolicited result When CLIP is enabled at the TE (and is permitted by the calling subscriber), an
code
unsolicited result code is returned after every RING (or +CRING: <type>) at a
mobile terminating call.
Voice call response format:
+CLIP: <number>, <type>,,,,<CLI validity>
Data/FAX call response format:
+CLIP: <number>, <type>
Parameter
<number>
<type>
<CLI validity>
Reference Note
GSM 07.07
TC3X_ATC_01_V04.00
0 suppress unsolicited result codes
1 display unsolicited result codes
0 CLIP not provisioned
1 CLIP provisioned
2 unknown
string type phone number of calling address in format specified by
<type>
type of address octet in integer format; 145 when dialling string
includes international access code character "+", otherwise 129.
0 CLI valid
1 CLI has been withheld by the originator.
3 CLI is not available due to interworking problems or limitations
of originating network. <number> shall be an empty string ("")
and <type> value will not be significant.
Page 81 of 204 29.05.2002