Setting Of Device Name - Sony NSS-S2 Installation Manual

1-12-2. Setting of Device Name

1. Display the CONFIGURATION menu screen. (Refer to Section 1-12-1.)
2. Display the "DEVICE NAME" using [UP] or [DOWN] key.
DEVICE NAME
3. Press [ENTER] key to enter a new device name.
4. Repeat the following steps (1) and (2) to enter a desired device name.
m
. Enter a device name within 16 characters.
. A to Z and underscore ( _ ) are available for a device name.
(1) Select a desired character using [UP] or [DOWN] key.
(2) Press [RIGHT] or [LEFT] key to move the cursor position.
5. After selecting the last character, press [ENTER] key.
6. The check screen is displayed.
CHANGE
OK NG
Set the cursor to OK using [RIGHT] or [LEFT] key and press [ENTER] key.
7. The device name is set and the display returns to the CONFIGURATION menu screen.
1-14 (E)
NSS-S2