Language setting
You can change the language to your own for the menus and the messages in
the display.
1
Turn on the unit.
Press the ! (power) button.
The message "Welcome to SONY HDPS" appears on the unit display.
!
! (power) button
Remaining internal hard disk capacity appears on the display after the
welcoming screen when no media is inserted in the drives of the unit.
2
In this mode, press and hold the CANCEL button until the
language display appears.
!
3
Press the CANCEL button to scroll to a language.
Slide the HOLD switch
in the direction opposite
to that of the arrow.
Remaining internal hard
disk capacity
Current language setting
Total number of languages
7
GB