Setting Of Network - Sony NSS-S2 Installation Manual

1-12-3. Setting of Network

1. Display the CONFIGURATION menu screen. (Refer to Section 1-12-1.)
2. Display the "IP ADDRESS" using [UP] or [DOWN] key.
IP ADDRESS
192.168.000.001
3. Repeat the following steps (1) and (2) to enter a desired IP address.
(1) Set a desired number using [UP] or [DOWN] key.
(2) Press [RIGHT] or [LEFT] key to move the cursor position.
4. After selecting the last number, press [ENTER] key.
5. The check screen is displayed.
CHANGE
OK NG
Set the cursor to OK using [RIGHT] or [LEFT] key and press [ENTER] key.
The IP address is set and the display returns to the CONFIGURATION menu screen.
6. Display the "NETMASK" using [UP] or [DOWN] key.
NETMASK
255.255.255.000
7. Set a subnet mask in the same procedure as steps 3 and 4.
8. Display the "DEFAULT GATEWAY" using [UP] or [DOWN] key.
DEFAULT GATEWAY
192.168.000.254
9. Set a gateway in the same procedure as steps 3 and 4.
NSS-S2
1-15 (E)