Checks After Connection - Sony NSS-S2 Installation Manual

1-11. Checks after Connection

Followings are check items after connection.
Confirm that the unit operates normally by checking each item.
FRONT
REAR
No. Check Item
1
Check the lighting color of the POWER
lamp on the front panel.
2 Check the lighting color of the SYSTEM
lamp on the front panel.
3 Check the lighting color of the BUSY
lamp on the front panel.
NSS-S2
MEDIA STORAGE UNIT NSS-S2
POWER SYSTEM BUSY
1 2 3 4
Check
Green
Amber
Red (blinking)
Green
Amber
(blinking)
Red (blinking)
Green
Countermeasure/Status
The two power units are running normally.
An abnormality occurred in one of the power
*1)
units .
An abnormality occurred in the two power
*1)
units .
Blinks during the unit initialization.
Self-diagnostic ends normally and the unit is
running normally.
An abnormality occurred in the unit
(recording and playing are possible).
Or the link of FIBRE CHANNEL is not
established.
Fatal abnormality occurred in the unit.
(recording and playing are not possible).
Accessing the HDD is in progress.
1-11 (E)