Table of Contents
Advertisement
ISO DIN radio provision with pocket
1. Secure the radio brackets to the pocket
using the (4) #8 x 3/8" Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly, then secure it to the assembly
using the screws supplied with the
radio. (Figure B)
Continue to Axxess Interface Installation
6
KIT ASSEMBLY
(Figure A)
(Figure B)
1.800.221.0932
|
MetraOnline.com
Advertisement
Table of Contents
