Download Print this page

Metra Electronics 99-3009 Installation Instructions

Car radio kit

Advertisement

Quick Links

rev. 090103
KIT FEATURES
Shaft and
DIN unit
99-3009
provisions
INSTALLATION
KIT COMPONENTS
INSTRUCTIONS
Radio Housing
APPLICATIONS
CAR
CHEVROLET
Camaro 1993-96..........................................................1
PONTIAC
Spacer
Bonneville 1994-99......................................................1
Firebird 1993...............................................................4
Firebird 1994-02........................................................ 5
(1) Keps Nut
Grand Am 1996-98......................................................2
(1) Phillips
Grand Am 1999-00..................................................... 2
Pan-head Screw
Grand Prix 1994-96.....................................................3
Grand Prix 1997-02.....................................................3
(1) Carriage Bolt
Sunfire 1995-99.......................................................... 4
Trans Am 1993.............................................................4
Trans Am 1994-02....................................................... 5
TOOLS REQUIRED
Phillips screwdriver
Cutting tool
1-800-221-0932
Socket wrench
© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION
PAGE
www.metraonline.com

Advertisement

loading

Summary of Contents for Metra Electronics 99-3009

  • Page 1: Installation Instructions

    Grand Am 1999-00... 2 Pan-head Screw Grand Prix 1994-96...3 Grand Prix 1997-02...3 (1) Carriage Bolt Sunfire 1995-99... 4 Trans Am 1993...4 Trans Am 1994-02... 5 TOOLS REQUIRED Phillips screwdriver Cutting tool 1-800-221-0932 Socket wrench © COPYRIGHT 2001 METRA ELECTRONICS CORPORATION PAGE www.metraonline.com...
  • Page 2 CHEVROLET Camaro 1993-96 Disconnect the negative battery terminal to prevent an accidental short circuit. Remove Cut and remove all mounting tabs on the (2) Phillips screws from the top of the driver's Radio Housing EXCEPT tabs "A". The side knee bolster. Remove (2) 7mm screws mounting tabs can be identified by the from the bottom of the knee bolster.
  • Page 3 PONTIAC Trans Am / Firebird 1994-02 "C" Disconnect the negative battery terminal to Cut and remove all mounting tabs on the prevent an accidental short circuit. Unclip Radio Housing EXCEPT tabs "C". The the radio trim bezel. Remove (4) 7mm hex- mounting tabs can be identified by the head screws securing the factory head unit stamped letter on the back of each tab.
  • Page 4 PONTIAC Grand Prix 1994-02 "C" Disconnect the negative battery terminal to Cut and remove all mounting tabs on the prevent an accidental short circuit. Using a Radio Housing EXCEPT tabs "C". The small set of pliers, grasp the retaining clip on mounting tabs can be identified by the the back of the gear shifter handle and stamped letter on the back of each tab.