Page 1
INSTALLATION INSTRUCTIONS FOR PART 99-3051 Chevrolet Corvette 99-3051 KIT FEATURES • ISO mount Radio Provision with Pocket • Two ISO Mount Unit’s Provision • Double DIN Radio Provision KIT COMPONENTS ( A) Pocket • ( B) Brackets • ( C) Trim Plate • ( D) (4) #6 X 1/4” Phillips Head Screws • (E) (2) #8 X 3/8” Phillips Head Screws...
99-3051 T ABLE OF CONTENTS Dash Disassembly 1990-1996 Chevrolet Corvette ......1, 2 Kit Assembly ISO Mount Radio Provision with Pocket ....3 Double DIN Radio Provision .
99-3051 1990-1996 CHEVROLET CORVETTE Disconnect the negative battery terminal to prevent an accidental short circuit. Remove (2) screws from center AC vent and remove vent. (Figure A) Remove rubber inserts in cup hold- ers and remove screw. (Figure B) Remove (2) screws from under carpet inside center console.
Page 4
99-3051 DASH DISASSEMBL Y 1990-1996 CHEVROLET CORVETTE Cut and remove obstruction from rear of radio cavity. (Figure D) CUT OUT...
99-3051 1990-1996 CHEVROLET CORVETTE ISO MOUNT RADIO WITH POCKET Mount the pocket trim-plate to the pocket using the (2) #8x3/8” Phillips head screws provided with kit. Larger lip towards top of pocket. (Figure A) Align the mounting holes in the...
99-3051 1990-1996 CHEVROLET CORVETTE DOUBLE DIN RADIO PROVISION Align the mounting holes in the left bracket with the mounting holes in the left side of the radio and mount the bracket to the radio using screws provided with the radio.
99-3051 FINAL ASSEMBL Y 1 Locate the factory wiring harness in the dash and make the connection as shown. Metra recomends using the proper mating adapter and making the connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.)