Memory Scan; Program Scan - Kenwood TS-940S Instruction Manual

Hide thumbs Also See for TS-940S:
Table of Contents

Advertisement

6-3. MEMORY SCAN
Memory scan operates within any memory channel
group, in 4 second intervals. Memory channels with no
data entered are skipped during Memory Scan.
To initiate Memory Scan:
1 . Select the desired memory channel group using the
MEMORY BANK switch on the top panel.
2. Press the MS key. Scan will start immediately.
Note:-------------------------------------
Once the desired memory channel is found the data can
be easily transferred to the active VFO. To shift the
data to the VFO, press the HOLD switch and then the M
..,. VFO switch. Pressing the M ..,. VFO switch releases
the MS and HOLD functions. To resume Memory Scan,
simply press the MS switch.
If there is no data stored in any of the 1 0 memory posi-
tions of a group, a triple "BEEP" will sound to signal an
error.
6-4. PROGRAM SCAN
Programmable scan will scan between the limits set in
memory channels 9 and 0. Since there are 4 banks of
memories, this means that you can program up to 4 dif-
ferent program scan limits. Scan proceeds from the
lower channel to the upper channel. Either channel 9 or
0 may hold the lower frequency. If either channel con-
tains no data, the Program Scan will not start, and a tri-
ple "BEEP" will sound to signal an error.
To initiate Program Scan:
1 . Select the desired memory channel group with the
MEMORY BANK switch.
2. Ensure the transceiver is in the VFO mode. (Program
scan will not work in the Memory mode.)
3. Press the PG.S switch to start scan.
4. To pause during Program Scan press the HOLD
switch. To resume scan release the HOLD switch.
5. To release PG.S press the PG.S switch.
Top cover section
~+---MEMORY
BANK
- VOX CONTROLS-
CAL
.... a ... nOEL ....
~··" ~,
DISPLAY
10Hz
100Hz
'
'
Lc:Y
SCALE
t
Q
tM!.Q.kHz
switch:
Select the
desired memory
group to be
scanned.
===p~~~~~~~~~;;;;;;;;;;---MS
switch
~
f.i.!=F111
=~u ~0. -~.c~
HOLD switch
M .... VFO switch
Top cover section
CAR
FM MIC
~+---MEMORY
BANK
switch:
Select the
desired memory
group to be
scanned.
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents