Kenwood TS-940S Instruction Manual page 34

• ACCjack
ACC1 jack
This jack is designed for connection of the 6-pin DIN con-
nector supplied with the optional interface unit.
ACC2jack
Terminal numbers and their applications are as follows:
...
CD
View from the rear panel
30
Pin No. Pin Name Application
1 ACCSW
2 ACCSW
3 Data output
Output level is fixed regardless of the
AF control setting.
Output voltage:
300 mV or more at maximum re-
ceiving input with 4. 7 k.Q load.
4 GND Grounding (The shielded wire of the
audio output terminal is connected
here.)
5 NC No connection
6 NC No connection
7 NC No connection
8 GND Grounding
9
MICmute Signal input from the MIC jack is mut-
ed. Grounding mutes signal.
10 NC No connection
11 Data input Input terminal for data communica-
tion. In SSB, MIC gain can be con-
trolled by the MIC control.
Input voltage:
500 mV or less
(SSB: Voltage starts deflecting ALC.
FM: Voltage providing
±
3.0 kHz
deviation.)
12
GND Grounding (The shielded wire of the
audio input is connected here.)
13 Stand by Standby terminal. (PTT line)
13 pin DIN plug supplied
''lDJ1
,,
Seperate the metal assembly and the nylon cover with the
lock-tab released as shown. To reassemble, reverse the
setps@-
CD.
Disassembling the plug