Table of Contents
Advertisement
Name
I
D
Age
Sex
Comment
Scope
±0
±0
±0
PENTAX
Name
I
D
Age
Sex
Image
FreezeMode : Field Frame
Esc
Comment
Scope
±0
±0
±0
PENTAX
Name
I
D
Age
Sex
Stopwatch
Start
Stop
Restart
Reset
ESC
Comment
Scope
±0
±0
±0
PENTAX
12/30/97
13:50:59
Dr.
Facility
12/30/97
13:50:59
Dr.
Facility
12/30/97
13:50:59
[00:00:00]
Dr.
Facility
5-5-10
Screen characters ON/OFF
All screen information such as Name, ID, Age, etc. and the colour
bar can be turned OFF or ON by pressing F3.
5-5-11
Pointer
The pointer function is a small arrow that will appear on the main
screen when activated.
Press F4 to activate the pointer function.
NOTE
Each time the EPK-700 is turned ON, the pointer position
is established at the center of the main screen.
To change the position of the pointer, use the Up, Down, Left,
Right arrow keys.
To turn the pointer OFF, press the F4 key again.
NOTE
If the processor is not turned OFF, when the pointer is
activated again, it will appear in the position previously
selected.
5-5-12
Freeze image control mode
Hold down the Ctrl key and press F1 to control the freeze image.
Press arrow keys to select Field for a more stabilized freeze image
or Frame for a higher resolution.
5-5-13
Stopwatch
The stopwatch function can be controlled by either the function
menu or the endoscope control buttons.
When selected, the stopwatch is displayed immediately below the
clock on the monitor display.
The stopwatch display format is
[HH:MM:SS];
HH = Hour
MM = Minute
SS = Second
To active the stopwatch function, press F5. When activated, the
stopwatch sub-menu will be displayed.
The arrow to the left of the menu indicates the cursor position.
To start the stopwatch, press Enter when the arrow is at Start
position.
The stopwatch [00:00:00] will appear on the monitor display.
Use the Up and Down arrow keys to advance the cursor to the other
menu selections and press ENT to activate the selected function.
OPERATION
27
Advertisement
Table of Contents
