Check Image Quality And Settings; Checking The Copy Image With The Test Chart; Date/Time Setting And Other Sp Settings - Ricoh MP 7503SP Field Service Manual

• The machine is waiting for entry of the Supervisor and Administrator passwords.
• It is the responsibility of the site supervisor and system administrator to set these passwords.
• The Home menu will not display until these passwords have been set. However, you can
bypass this screen to complete the installation.
6. Enter the SP mode.
7. Close the front door.
8. Do SP5755-002. This cancels the password request screen and allows you to continue with the
machine installation as long as the machine remains on.
• For more information about setting the passwords, see "Important Notice on Security Issues" in
this section.
9. While still in the SP mode, open SP2963-002
10. Enter the lot number of the developer. (This is the number embossed on the edge of the developer
pack.)
11. Open SP2963-001 and then touch [Execute]. This initializes toner supply and sets up the auto
process control settings. This will require about 4 min.
12. When you see the "Completed" message, touch [Exit].
13. Press [Exit] twice to exit the SP mode.

Check Image Quality and Settings

Checking the copy image with the test chart

Check the copy image with the test chart.

Date/Time Setting and Other SP Settings

1. On the operation panel press
2. Touch [Machine Features].
3. On the operation panel, press the User Tools.
4. On the touch-panel, press "System Settings".
5. Press the "Timer Setting" tab.
6. Press "Set Date" to enter the date.
7. Press "Set Time" to enter the time.
8. You may also need to do the following SP code settings.
> > User Tools
Main Machine
133