8. Place a level on the front edge of the exposure glass [A], and then on the right edge of the
exposure glass [B].
9. The machine should be level:
• Front to back: Within ±5 mm (0.2") of level
• Right to left: Within ±5 mm (0.2") of level
10. If necessary, use the accessory wrench to adjust the height of the machine at each corner.
Attach Cleaning Cloth Holder
1. Clean the upper, right front corner of the machine [A] above the bypass tray with a clean damp
cloth.
2. Peel the tape from the back of the cleaning cloth holder [B]
3. Attach the holder at the upper right corner of the machine, and then put the cleaning cloth in the
holder.
Main Machine
125