Ricoh MP 7503SP Field Service Manual page 870

4. Replacement and Adjustment
• Wait for the message that tells you the download has finished and to cycle the machine
off/on, but do not turn the machine off. Touch the Close button.
• If the machine issues SC870-11 (Address Book Data Error), just ignore this message and
continue with this procedure.
19. Turn the machine off, and then remove the SD card from SD Card Slot 2.
20. Turn the machine on.
21. Insert into SD Card Slot 2 the SD card with the Address Book data you copied earlier.
22. Do SP5846-052 (UCS Settings – Restore Directory Info.) to restore the address data.
23. Turn the machine off, and then remove the SD card from SD Card Slot 2.
24. Turn the machine on.
25. If the Fax unit is installed, do the same settings you performed earlier to confirm that the settings
have not changed:
• F Code Box List: Fax Initial Setting > Main Setting > F Code Box Setting: List Print > Print
• Special Destination List: Fax Initial Setting > Receive Setting > Special Destination Setting: List
Print > Print
• Fax Initial Setting >Receive Settings > Onscreen items and settings
• Fax Initial Setting > Send Settings > Onscreen items and settings
26. Do SP5990-001 to print another SMC report, compare this printout with the earlier printout to
confirm that the settings are the same, and then correct any settings that are different. After NVRAM
has been replaced the following counts are reset
Total Count
Other Counts
27. Cycle the machine off/on.
• If either SP5824 (NVRAM Data Upload) or SP5825 (NVRAM Data Download) fails to
execute, you will have to restore the settings manually with the data on the SMC report
provided with the machine.
• Re-install the Data Overwrite Security function and HDD Encryption feature.
• If the machine displays "SD cards for restoration required" after the NVRAM has been
replaced, then restoration of the Data Encryption key is required.
868
Item
0
0
Count