Lcit Heater (Option); Accessories - Ricoh MP 7503SP Field Service Manual

12. Set the bottom edge of each side fence into the slot for the paper size that you want you load into
the LCIT
13. Set the notches at the top of each side fence at the name of the paper size.
14. Fasten the side fences at the top, and then re-assemble the LCIT.
15. Load some paper in the LCIT.
16. Turn the machine on.
17. Open SP5959-005 (Paper Type - Tray 4), and then select the paper size you have selected with
the side fences.

LCIT Heater (Option)

Accessories

Check the accessories and their quantities against this list:
No.
1. LCIT Heater
2. Bracket
3. Clamps
4. Screws M3x6
5. Ground Wire
6. Ground Screws – Pan Head
Description
LCIT RT4040 (D3D6)
Q'ty
1
1
6
4
1
2
175