D2: Reference Limits; D3: Jump Frequency - Omron Q2A Series Technical Manual

11.5 d: REFERENCE
No.
Name
(Hex.)
d1-13 Reference 13
(028E)
RUN
d1-14 Reference 14
(028F)
RUN
d1-15 Reference 15
(0290)
RUN
d1-16 Reference 16
(0291)
RUN
d1-17 Jog Reference
(0292)
RUN
◆

d2: REFERENCE LIMITS

No.
Name
(Hex.)
d2-01 FRef Upper Limit
(0289)
d2-02 FRef Lower Limit
(028A)
d2-03 Analog FRef Lower
Limit
(0293)
◆

d3: JUMP FREQUENCY

No.
Name
(Hex.)
d3-01 Jump Frequency 1
(0294)
d3-02 Jump Frequency 2
(0295)
d3-03 Jump Frequency 3
(0296)
d3-04 Jump Frequency Width
(0297)
412
Description
V/f CL-V/f OLV CLV AOLV
Sets the frequency reference in the units from o1-03 [FrqDisplay Unit Selection].
Note:
The default setting is o1-03 = 1 [0.01% (100%=E1-04)] when A1-02 = 6, 7
[Control Method = PM AOLVector, PM CLVector].
V/f CL-V/f OLV CLV AOLV
Sets the frequency reference in the units from o1-03 [FrqDisplay Unit Selection].
Note:
The default setting is o1-03 = 1 [0.01% (100%=E1-04)] when A1-02 = 6, 7
[Control Method = PM AOLVector, PM CLVector].
V/f CL-V/f OLV CLV AOLV
Sets the frequency reference in the units from o1-03 [FrqDisplay Unit Selection].
Note:
The default setting is o1-03 = 1 [0.01% (100%=E1-04)] when A1-02 = 6, 7
[Control Method = PM AOLVector, PM CLVector].
V/f CL-V/f OLV CLV AOLV
Sets the frequency reference in the units from o1-03 [FrqDisplay Unit Selection].
Note:
The default setting is o1-03 = 1 [0.01% (100%=E1-04)] when A1-02 = 6, 7
[Control Method = PM AOLVector, PM CLVector].
V/f CL-V/f OLV CLV AOLV
Sets the JOG frequency reference in the units from o1-03 [FrqDisplay Unit Selection].
Set H1-xx: MFDI Function Select = 6 [Jog Reference] to use the Jog frequency
reference.
Note:
o1-03 = 1 [0.01% (100%=E1-04)] when A1-02 = 6, 7 [Control Method = PM
AOLVector, PM CLVector].
Description
V/f CL-V/f OLV CLV AOLV
Sets maximum limit for all frequency references. This value is a percentage of E1-04
[Max Output Frequency].
V/f CL-V/f OLV CLV AOLV
Sets minimum limit for all frequency references. This value is a percentage of E1-04
[Max Output Frequency].
V/f CL-V/f OLV CLV AOLV
Sets the lower limit of the master frequency reference (Multi-Step Speed 1) as a
percentage of E1-04 [Max Output Frequency].
Description
V/f CL-V/f OLV CLV AOLV
Sets the median value of the frequency band that the drive will avoid.
V/f CL-V/f OLV CLV AOLV
Sets the median value of the frequency band that the drive will avoid.
V/f CL-V/f OLV CLV AOLV
Sets the median value of the frequency band that the drive will avoid.
V/f CL-V/f OLV CLV AOLV
Sets the width of the frequency band that the drive will avoid.
OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
OLV/PM AOLV/PM CLV/PM EZOLV OLV/PM
SIEPYEUOQ2A01A AC Drive Q2A Technical Manual
Default
Ref.
(Range)
0.00 Hz 593
(0.00 - 590.00 Hz)
0.00 Hz 593
(0.00 - 590.00 Hz)
0.00 Hz 593
(0.00 - 590.00 Hz)
0.00 Hz 593
(0.00 - 590.00 Hz)
6.00 Hz 593
(0.00 - 590.00 Hz)
Default
Ref.
(Range)
100.0% 594
(0.0 - 110.0%)
0.0% 594
(0.0 - 110.0%)
0.0% 594
(0.0 - 110.0%)
Default
Ref.
(Range)
0.0 Hz 595
(Determined by A1-02)
0.0 Hz 595
(Determined by A1-02)
0.0 Hz 595
(Determined by A1-02)
1.0 Hz 595
(Determined by A1-02)