Clutch Replacement; Removal - Graco LineLazer V 250SPS Repair Parts

Clutch Replacement

Clutch Replacement

Removal

1. Remove ground drive belt, page Ground Drive Belt
Replacement, page 11.
2. Remove oil reservoir belt, see Oil Reservoir Belt
Replacement, page 12.
3. Remove two hold-down bolts for the ground drive
pump bracket.
4. Unscrew tensioning bolt from the ground drive pump
bracket.
5. Move ground drive pump assembly aside.
24
ti19215a
ti19131a
ti19213a
6. Remove three bolts (81) and pulley (61).
61
81
7. Remove engine recoil starter and place a screw-
driver through the recoil starter cup.
8. Remove center bolt (59) and remove clutch (57).
57
60
58
59
ti19216a
ti19696a
ti19697a
56
ti19214a
3A3394E Repair - Parts