Clutch Replacement; Removal - Graco LineLazer IV 250SPS Repair Manual

Clutch Replacement

Removal

1. Remove Ground Drive Belt, page 11.
2. Remove Oil Reservoir Belt, page 12.
3. Remove two hold-down bolts for the ground drive
pump bracket.
4. Unscrew tensioning bolt from the ground drive
pump bracket.
5. Move ground drive pump assembly aside.
6. Remove three bolts (81) and pulley (61).
61
81
3A2593C Repair
ti19215a
ti19131a
ti19213a
ti19216a
7. Remove engine recoil starter and place a screw-
driver through the recoil starter cup.
8. Remove center bolt (59) and remove clutch (57).
57
60
58
59
9. Disconnect clutch connector to main wire harness.
ti19212a
Clutch Replacement
ti19696a
ti19697a
56
ti19214a
21