Changing The User Data Of The Connectivity Module - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

Operation

7.3 Changing the user data of the connectivity module

Procedure
1. Select the "Settings" menu.
2. Select the "Sensor values" submenu.
3. Change the measurement interval.
4. Change the synchronization interval.
7.3 Changing the user data of the connectivity module
1. Select the "Settings" menu.
2. Select the "User" submenu.
3. Change the user names. The user name name may not exceed 20 characters.
32
SIMOTICS CONNECT 400
Operating Instructions, 07/2019