Siemens SIMOTICS CONNECT 400 Operating Instructions Manual page 12

Description
3.2 "SIMOTICS CONNECT 400" connectivity module
The motor data that is captured is transferred to SIDRIVE IQ via a WLAN interface where it is
analyzed.
Components
The connectivity module encompasses the following components:
● Integrated sensors to measure the motor data
● Data memory
● Processor
● SPBTLE-RF bluetooth module for communication with a mobile device to configure the
connectivity module
● SN8000/8000UFL WLAN communication module to transfer the measured data to
SIDRIVE IQ and update the firmware
● Lithium battery for the power supply
Additional information
Additional information about SIDRIVE IQ is provided in the "SIDRIVE IQ Suite"
support.industry.siemens.com/cs/ww/en/ps/25291) Operating Instructions.
10
(https://
SIMOTICS CONNECT 400
Operating Instructions, 07/2019