Exiting The Onboarding Process Via The "Sidrive Iq Config" Application - Siemens SIMOTICS CONNECT 400 Operating Instructions Manual

6.7.5

Exiting the onboarding process via the "SIDRIVE IQ Config" application

Note
Settings cannot be subsequently changed
Carefully select the following settings. Once selected, you cannot change the settings.
Repeat the onboarding process if you have selected an incorrect setting.
1. Check the asset data.
2. Confirm the onboarding process by clicking on "Onboarding". A dialog box to select the
operating mode opens.
SIMOTICS CONNECT 400
Operating Instructions, 07/2019
6.7 Onboarding process using the "SIDRIVE IQ Config" application
Commissioning
27