Siemens SINAMICS S120 Equipment Manual page 128

Active Line Modules
5.6 Technical specifications
Article number
Max. cable length
(total of all motor cables and DC link)
- Shielded
- Unshielded
Degree of protection
Dimensions
- Width
- Height
- Depth
Frame size
Weight
Recommended fuse
- Number per phase (connected in parallel)
- Rated current
- Frame size acc. to IEC 60269
Minimum short-circuit current
Valid for a 5s duty cycle (overload duration) and a duty cycle duration of 300s based on the rated DC-link current.
1)
Valid for a 5s duty cycle (overload duration) and a duty cycle duration of 300s based on the rated infeed/regenerative
2)
feedback current.
The specified power loss is the maximum value at 100% utilization level. The value in normal operation is lower.
3)
This value applies to the water coolant option; for other coolant types, see Chapter "Cooling circuit and coolant proper-
4)
ties".
To achieve a UL-approved system, it is absolutely essential to use the fuse types specified in the table.
5)
Minimum current required for reliable triggering of the protective devices.
6)
128
6SL3335–
m
m
mm
mm
mm
kg
A
A
6)
7TG38-1AA7 7TG41–0AA7 7TG41–3AA7 7TG41-6AA7
2250 2250
3375 3375
IP00 IP00
265 295
987 1510
545 545
HXL JXL
125 230
3NE1435-2 3NE1436-2
2 2
560 630
3 3
12600 16000
Water-cooled chassis power units for common cooling circuits
2250 2250
3375 3375
IP00 IP00
295 295
1510 1510
545 545
JXL JXL
230 240
3NE1438-2 3NE1436-2
5)
2 3
800 630
3 3
20000 24000
Manual, 08/2017, 6SL3097-4AM10-0BP0