Roland VersaUV LEF-12 First Step Manual page 32

Before Using This Printer

REMOVE CL-LIQUID
1 2

REMOVE DUMMY CRT.
SLOT: 3,4
SET CL-LIQUID
3 4

CHECK
DRAIN BOTTLE

Make sure the drain bottle is installed, and press
Cleaning is finished.
3.
Insert the ink cartridges for the respective colors


SET CARTRIDGE
1 2 3 4 5 6
FILLING INK...
Cartridges to use
Cyan, magenta, yellow, black, gloss, white (one each)
30
When this screen appears, pull out the cleaning cartridges.
When this screen appears, pull out the dummy cartridges,
and press .
When a new slot number is displayed, repeat the procedure
from Steps 3 to 6 using the cleaning cartridge you just pulled
out.
Repeat these steps until the screen shown on the left appears.
Before inserting ink cartridges, shake each
of them 50 times (about 15 seconds).
The precipitation of the ingredients in the ink dis-
ables printing in normal color. To allow the ingre-
dients to be mixed well, shake each ink cartridge
horizontally from side to side by 5 cm (2 inches) from
each end of the ink cartridge.
Insert the ink cartridge for each color.
Insert the ink cartridge for each color.
.