Roland VersaUV LEF-12 First Step Manual page 36

Before Using This Printer
Make the Network Settings on the Printer
Important
The addresses used in this section are merely example settings. For detailed information about the settings,
consult your network administrator.
1.
Set the IP address

Press

MENU
SYSTEM INFO.

SYSTEM INFO.
NETWORK

IP ADDRESS
000 . 000 . 000 . 000

IP ADDRESS
192 . 000 . 000 . 000

IP ADDRESS
192 . 000 . 000 . 000


Repeat

IP ADDRESS
192 . 168 . 000 . 003
NETWORK
IP ADDRESS
2.
Set the subnet mask

NETWORK
IP ADDRESS

NETWORK
SUBNET MASK
34
.
Press
left appears.
Press
Press
[IP ADDRESS]: 192.168.000.XXX
Note: Here, "XXX" may be any number you want from 2 to 254. However,
do not use the same number as set in "Make the Network Settings for the
Computer". Here, "192,168,000,003" is entered by way of example.
For the part corresponding to "192.168.000," apply the same value as the
setting of your computer.
Press
Press

and to set all the address numbers.
When you finish making the setting, press
Press
The screen shown in the figure appears again.
Press
Press
several times until the screen shown on the
in this order.
three times.
to select the address number.
.
.
.
twice.
.