Table of Contents
Advertisement
5. Installing the Ink Cartridges
Filling with Ink for the First Time
Special procedures are required when installing ink cartridges for the first time. These are required only once, when installing
ink cartridges for the first time after shipment from the factory. Firstly, clean the print heads with the cleaning cartridges,
and then fill with the inks of each color.
This operation requires four SOL INK cleaning cartridges.
Never under any circumstances use anything other than the specified type of ink or cleaning fluid.
Installing the Ink Cartridges
Be sure to follow the on-screen instructions
for insertion and removal.
Orient so that the surface with the arrow is facing up.
Insert and remove slowly, one at a time.
Insert firmly, as far as it will go.
During cleaning, you insert and remove cartridges several times. The on-screen messages indicate which to insert and remove,
and when to insert and remove them.
Insert each color ink cartridge into the slot labeled with the matching color. The cleaning cartridges are not differentiated
by color.
CAUTION
Never insert your hand or fingers into the opening of the front cover.
The print heads move at high speed inside the cover. Contact may cause injury.
1.
Switch on the power and make the initial settings.
u
Arrow
Front cover
SET SOL CL-LIQUID
1
6 7
1
Slot number
1
2
3
4
Close the front cover.
12
5
6
35
Hide quick links:
Advertisement
Table of Contents
