Roland VersaUV LEF-12 First Step Manual page 45


CLEANING
TEST PRINT
Dot drop-out
If there is dot drop-out, proceed to Step
Print".
2.
Perform Normal Cleaning

Press .

FUNCTION
CLEANING

CLEANING
NORMAL CL.

NORMAL CL.
A B
_

NORMAL CL.
A _
CLEANING. . .
> > >
NORMAL CL.
A _

W : mm L :
H : mm
Press .
The test pattern is started.
When the test print results are difficult to make out
Check the results in a bright location, changing your line
of vision. It is visible using the reflection of the light.
2.
If there is no dot drop-out, proceed to "STEP 3: Start Production
Press
Press .
Use
to be cleaned.
Use
Repeat this procedure to display the groups of only the
heads that require cleaning, and press
Normal cleaning starts. It takes about two to three minutes.
When it finishes, the screen shown in the illustration appears again.
Press
mm
.
to choose the group of heads that is not
to get rid of the group display.
to return to the original screen.
First Time Printing
.
43