Roland VersaUV LEF-12 First Step Manual page 49


Double click a print job in the job list.
[Job Settings] screen appears.
The white part in the layout area is the print area that was loaded in STEP
in the print area will not be printed.
Use this screen to fit the print data in the print area and adjust its position.
Select "Fit to Media Size" checkbox
to adjust the print data based on the
print area.
Select "Center on the Media" check-
box to place the print data in the
center of the print area.
Note: This is an example when "Adjust to Center of Media" is selected.
First Time Printing
1.
The portion of the print data not
Layout Area
47