MARUTI SUZUKI Celerio Tour H2 Owner's Manual page 89

Description of Controls
EXAMPLE
(2) (5)
2
1
3
0
4
(3) (4)
Temperature selector (1)
This is used to select the temperature by
turning the selector.
Blower speed selector (2)
This is used to turn on the blower and to
select blower speed by turning the selec-
tor.
Air flow selector (3)
(c)
(b)
(a)
This is used to select one of the functions
described below.
Ventilation (a)
EXAMPLE
(1)
Temperature-controlled air comes out of
76MM05014
the center and side air outlets.
Bi-level (b)
EXAMPLE
EXAMPLE
Temperature-controlled air comes out of
the floor outlets and cooler air comes out
(d)
of the center and side outlets. When the
temperature selector (1) is in the fully
COLD position or fully HOT position, how-
ever, the air from the floor outlets and the
(e)
air from the center and side outlets will be
the same temperature.
61MM0A019
OTHER CONTROLS AND EQUIPMENT
Heat (c)
EXAMPLE
Temperature-controlled air comes out of
the floor outlets and the side outlets, also
76MH0A083
comes out of the windshield defroster out-
lets and also comes slightly out of the side
defroster outlets.
Heat & defrost (d)
EXAMPLE
76MH0A084
Temperature-controlled air comes out of
the floor outlets, the windshield defroster
outlets, the side defroster outlets and the
side outlets.
76MH0A085
76MH0A087
5-10