Headlight Leveling Switch; Turn Signal Control Lever - MARUTI SUZUKI Celerio Tour H2 Owner's Manual

BEFORE DRIVING
OFF (1)
All lights are off.
(2)
Front position lights, tail lights, license
plate light and instrument lights are on, but
headlights are off.
(3)
Front position lights, tail lights, license
plate light, instrument lights and headlights
are on.
EXAMPLE
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) or pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument panel will come on. To momen-
tarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
Lights "On" reminder
A buzzer/chime sounds to remind you to
turn off the lights if they are left on when
the ignition key is removed and the driver's
door is opened.
2-35

Headlight Leveling Switch

EXAMPLE
Level the headlight beam according to the
load condition of your vehicle by turning
this switch. The chart below shows the
appropriate switch position for different
60MK012
vehicle-load conditions.
Vehicle Load Condition
Driver only
Driver + 1 passenger
(in front seat)
Driver + 4 passengers,
no cargo
Driver + 4 passengers,
cargo added
Driver + full cargo

Turn Signal Control Lever

EXAMPLE
80JM040
To avoid possible injury, do not oper-
ate controls by reaching through the
steering wheel.
Switch
Turn Signal Operation
Position
With the ignition switch in the "ON" posi-
0 tion, move the lever up or down to activate
the right or left turn signals.
0
1
2
3
65D611S
WARNING