MARUTI SUZUKI Celerio Tour H2 Owner's Manual page 52

BEFORE DRIVING
NOTICE
• If you operate the engine with this
light on, severe engine damage can
result.
• Do not rely on the Oil Pressure
Light to indicate the need to add
oil. Be sure to periodically check
the engine oil level.
Charging Light
This light comes on when the ignition
switch is turned to the "ON" position, and
goes out when the engine is started. The
light will come on and remain on if there is
something wrong with the battery charging
system. If the light comes on when the
engine is running, the charging system
should be inspected immediately by your
authorised Maruti Suzuki workshop.
2-33
High Engine Coolant Temperature
Warning Light (red color)
When the ignition switch is turned to the
"ON" position, this light comes on briefly so
you can check that the light is working. If
this light blinks while driving, it means the
engine is running hot. Avoid driving condi-
tions that may lead to actual overheating. If
the light stays on without blinking, then the
engine is overheating. Follow the instruc-
tions in the "If the Engine Overheats" of
50G052
"EMERGENCY SERVICE" section.
NOTICE
Continuing to drive the vehicle when
engine overheating is indicated can
result in severe engine damage.
Immobilizer System Light
When the ignition switch is turn to the "ON"
position, this light comes on briefly so you
54G344
can check that the light is working. If this
light blinks with the ignition switch is turn to
the "ON", the engine will not start.
NOTE:
If this light blinks, turn the ignition switch to
the "LOCK" position, then turn it back to
the "ON" position.
If the light still blinks with the ignition switch
turned to the "ON" position, there may be
something wrong with your key or with the
immobilizer system. Ask your authorised
Maruti Suzuki workshop to inspect the sys-
tem.
80JM122