MARUTI SUZUKI Celerio Tour H2 Owner's Manual page 51

Malfunction Indicator Light
Your vehicle has a computer-controlled
emission control system. A malfunction
indicator light is provided on the instrument
panel to indicate when it is necessary to
have the emission control system serviced.
The malfunction indicator light comes on
when the ignition switch is turned to "ON"
position to let you know the light is working
and goes out when the engine is started.
If the malfunction indicator light comes on
when the engine is running, there is a
damage with the emission control system.
Bring the vehicle to your authorised Maruti
Suzuki workshop to have the damage
fixed.
NOTICE
Continuing to drive the vehicle when
the malfunction indicator light is on
can cause permanent damage to the
vehicle's emission control system,
and can affect fuel economy and
driveability.
Electric Power Steering Light
63J031
This light comes on when the ignition
switch is turned to the "ON" position, and
goes out when the engine is started.
If this light comes on while driving, the
power steering system may not work prop-
erly. Have the system inspected by your
authorised Maruti Suzuki workshop.
NOTE:
Following operations of the steering wheel
while parking or driving at a very low-
speed may have steering effort bigger
gradually. This is not a malfunction of the
steering system, but the power steering
control system limits the power assist in
order to prevent them from overheating.
• The steering wheel is operated very
often.
• The steering wheel is kept in a fully
turned position for a long while.
When the power steering control system
cool down, the power steering system
back to the original condition.
However, repeating these operations could
cause the power steering system dam-
aged.
NOTE:
If the power steering system does not work
properly, you will feel heavier to steer but
you still will be able to steer.
NOTE:
If the steering is operated, you may hear a
noise. This is normal and indicates that the
power steering system works properly.
79J039
Oil Pressure Light
This light comes on when the ignition
switch is turned to the "ON" position, and
goes out when the engine is started. The
light will come on and remain on if there is
insufficient oil pressure. If the light comes
on when driving, pull off the road as soon
as you can and stop the engine.
Check the oil level and add oil if necessary.
If there is enough oil, the lubrication sys-
tem should be inspected by your autho-
rised Maruti Suzuki workshop before you
drive the vehicle again.
BEFORE DRIVING
50G051A
2-32