Wiper Blades - MARUTI SUZUKI Celerio Tour H2 Owner's Manual

INSPECTION AND MAINTENANCE
EXAMPLE
(3)
(4)
(5)
(4) Removal
(5) Install
4) To remove and install the bulb of the
high-mount stop light (3), simply pull out
or push in the bulb.
Interior Light
Remove the lens by using a flat blade
screwdriver covered with a soft cloth as
shown. To install it, simply push it back in.
EXAMPLE
7-27

Wiper Blades

EXAMPLE
76MH0A128
If the wiper blades become brittle or dam-
aged, or make streaks when wiping,
replace the wiper blades.
To install new wiper blades, follow the pro-
cedures below.
To avoid scratching or breaking the
windshield, do not let the wiper arm
strike the windshield while replacing
the wiper blade.
NOTE:
Some wiper blades may be different from
the ones described here depending on
vehicle specifications. If so, consult your
authorised Maruti Suzuki workshop for
proper replacement method.
60G115
76MM07002
NOTICE
For windshield wipers:
EXAMPLE
1) Hold the wiper arm away from the wind-
shield.
NOTE:
When raising both of the front wiper arms,
pull the driver's side wiper arm up first.
When returning the wiper arms, lower the
passenger's side wiper arm first.
Otherwise, the wiper arms may interfere
with each other.
64MM07020