MARUTI SUZUKI Celerio Tour H2 Owner's Manual page 30

BEFORE DRIVING
NOTE:
To identify the center seat belt buckle and
latch plate in the rear seat, "CENTER" is
marked on the buckle and latch plate of the
center lap belt. The buckles are designed
so a latch plate cannot be inserted into the
wrong buckle.
2-11
Driver's Seat Belt Reminder
With tachometer
EXAMPLE
Without tachometer
EXAMPLE
When the driver does not buckle his or her
seat belt, the driver's seat belt reminder
light in the instrument cluster will come on
or blink and a buzzer will sound as a
reminder to the driver to buckle his or her
seat belt. For more details, refer to the
explanation below.
If the driver's seat belt remains unbuckled
when the ignition switch is turned to "ON"
position. The reminder works as follows:
1) The driver's seat belt reminder light will
come on.
2) After the vehicle's speed has reached
about 15 km/h, the driver's seat belt
reminder light will blink and a buzzer
will sound for about 95 seconds.
3) After step 2) has finished, the reminder
light will remain on until the driver's seat
belt is buckled.
76MM02014
If the driver has buckled his or her seat belt
and later unbuckles the seat belt, the
reminder system will be activated from
step 1) or step 2) according to the vehicle's
speed. When the vehicle's speed is below
about 15 km/h, the reminder will start from
step 1). When the vehicle's speed is above
about 15 km/h, the reminder will start from
step 2).
The reminder will be automatically can-
celed when the driver's seat belt is buckled
or the ignition switch is turned off.
76MM02015