MARUTI SUZUKI Celerio Tour H2 Owner's Manual page 47

Average fuel consumption
If you selected average fuel consumption the
last time you drove the vehicle, the display
shows the last value of average fuel consump-
tion from previous driving when the ignition
switch is turned to the "ON" position. Unless
you reset the value of average fuel consump-
tion, the display indicates the value of average
fuel consumption which includes average fuel
consumption during previous driving.
To reset the average fuel consumption to zero,
push and hold the indicator selector knob (2)
for a while when the display shows the aver-
age fuel consumption.
NOTE:
When you reset the indication or reconnect
the negative (–) terminal to the battery, the
value of average fuel consumption will be
shown after driving for a while.
To change the unit of average fuel consump-
tion, while pushing and holding the trip meter
selector knob (1), turn the indicator selector
knob (2).
EXAMPLE
NOTE:
• When you change the units that average
fuel consumption is displayed in, the
instantaneous fuel consumption units will
be changed automatically.
• When you reconnect the negative (–)
terminal to the battery, the unit of the
average fuel consumption will be reini-
tialized. Change the unit again to your
preference.
Driving range
If you selected driving range the last time
you drove the vehicle, the display indicates
"---" for a few seconds and then indicates
the current driving range when the ignition
switch is turned to the "ON" position.
The driving range shown in the display is
the approximate distance you can drive
until the fuel gauge indicates "E", based on
current driving conditions.
When the low fuel warning light comes on,
the display "---" will appear.
If the low fuel warning light comes on, fill
the fuel tank immediately regardless of the
value of driving range shown in the display.
(Initial
As the driving range after refueling is cal-
setting)
culated based on the most recent driving
condition, the value is different each time
you refuel.
76MH0A046
BEFORE DRIVING
NOTE:
• If you refuel when the ignition switch is in
the "ON" position, the driving range may
not indicate the correct value.
• When you reconnect the negative (–)
terminal to the battery, the value of driv-
ing range will be shown after driving for a
while.
2-28