Table of Contents
Advertisement
Connecting the 10/100BASE-T (Ethernet) Port
The 10/100BASE-T (Ethernet*) port is used to connect to a local area network
(LAN). This port, located on the back of the Passport 4460 unit, connects the unit
to the Ethernet.
The following illustration shows the location of the LAN port and its connection
through the Ethernet.
The following illustration displays the pin assignments for the 10/100BASE-T
connector.
RJ-45 Pin Assignments
After the system is operating, refer to the software documentation for
configuration information (see
Chapter 7 Port Connections for the Passport 4460 105
Network
Interface Card
Pin 1
1
(Tx+) Transmit Data Positive
2
(Tx-) Transmit Data Negative
3
(Rx+) Receive Data Positive
4
5
6
(Rx-) Transmit Data Negative
7
Pins 4, 5, 7, 8 Not Connected
8
EXPANSION
2
"Product documentation" on page
Reference for Passport 4460 Hardware
STAT
10/100
RST
P2 STATUS
P1 STATUS
PORT 1
P3 STATUS
SYSTEM
P
P
STATUS
O
O
R
R
T
T
3
2
LAN Port
17).
Hide quick links:
Advertisement
Table of Contents
