Configuring Junos Os On The Qfx5120 - Juniper QFX5120 Series Hardware Manual

NOTE: If your laptop or PC does not have a DB-9 male connector pin and you want to connect
your laptop or PC directly to the device, use a combination of the RJ-45 to DB-9 female adapter
supplied with the device and a USB to DB-9 male adapter. You must provide the USB to DB-9 male
adapter.
To connect the device to a management console (see
1. Connect one end of the Ethernet cable to the console port (labeled CON, CONSOLE, or CON1) on the
device.
2. Connect the other end of the Ethernet cable to the console server (see
management console (see
Figure 57: Connecting a Device to a Management Console Through a Console Server
CON
To Console
port
Figure 58: Connecting a Device Directly to a Management Console

Configuring Junos OS on the QFX5120

IN THIS SECTION
QFX5120 Default Configuration | 113
Connecting and Configuring a QFX5120 Switch | 113
Figure 57 on page 112
Figure 58 on page 112).
Console server
and Figure 58 on page
Figure 57 on page
PC
112
112):
112) or