Initial Start-Up - Thermador Pro Harmony Professional Series Use And Care Manual

Symbol/mode
Door Symbol is displayed during and after the self-clean mode
locking* when the door is locked.
Remote Symbol is displayed if customer service is connected during
service* remote access.
* Not available on 30 inch models.

Initial start-up

Start-up settings
The settings may be accessed at any time by pressing
SETTINGS while the appliance is in standby mode. All
oven knobs must be turned to OFF to access the settings.
1. Connect the appliance to the power supply.
Time of Day
Press Enter to save
 
TIMERS SETTINGS ENTER
2. Select a setting with the left ( or ).
Language
Press Enter to save
   
TIMERS SETTINGS ENTER
3. Change the setting parameter with the right ( or ).
Language
Press Enter to save
 
TIMERS SETTINGS ENTER
4. Press ENTER to confirm the selection or SETTINGS to
discard the changes.
First start up
 
TIMERS SETTINGS ENTER
Definitions and recommendations
06:30
 
English
 
Français
   
finished
fi8d
 
NTE NTE
Electric
main


– The screen changes to standby mode.
06:30
 
TIMERS SETTINGS ENTER
Available settings
Setting Option
Time of day Time in hours and minutes
Language English, Français, Español
Clock format 12 hr, 24 hr
Clock display Digital, Analogue
Fast preheat On, Off
Key press sound On, Off
Display brightness 1 – 5
Standby mode On, Off
Convect conversion On, Off
Decreases oven temperature by
25°F (4°C)
Temperature offset • Temp offset: Right oven
-35° to +35°F (-20° to +20°C)
• Temp offset: Left oven
-35° to +35°F (-20° to +20°C)
Sabbath On, Off
Home Connect Set up using the assistant
Factory settings Restore
Service access Connect
Customer service Displays customer service contact
information
Gas Electric Gas
main aux. aux.

  
 
Page. 32