Before You Begin; Getting Started; Surface Burners; Oven Racks - Thermador Pro Harmony Professional Series Use And Care Manual

Before you begin

Getting started

Data rating label
• Record the model and serial number.
• The model and serial number must be provided when
calling customer support for assistance.
• Register your BSH product to ensure timely service
and access to your product related information. For
product registration information see "Before calling
for service".

Surface burners

1. Ensure that the burner caps are correctly seated on
the burner bases of the range's cooktop (see
page 18).
2. Turn on each burner to check for proper flame color
(see "Flame description" on page 20 for details).

Oven racks

To install rack guides
1. Push the two rails in the holes in the back of the oven
cavity.
2. Slide the guide's key slots over the shoulder bolts.
3. At the front of the oven cavity press down on the front
of rack guide to clear the heads of the two shoulder
bolts.
®
To install Full Access racks
1. Hold the rack on a slight angle and place the safety
hooks under the front of the rack guides.
2. Push the rack into the oven, lifting the rack stops
over the front of the rack guides.
3. Hold the rack straight.
4. Push the rack in completely.
5. Engage the rack's front hooks on the rack guides.
IMPORTANT: When placing the gliding rack in the oven,
make sure the front supports on the rack guides rest in
the large slots at the front corners of the rack. This is
necessary to keep the rack in the correct position while
fully inserted into the oven.
Page. 16