Initial Start-Up; Setting The Oven(S) - Thermador Professional Series Use And Care Manual

Initial start-up

Start-up settings
The time of day, language and time display settings may
be accessed at any time by pressing SETTINGS while the
appliance is in standby mode.
1. Connect the appliance to the power supply.
Time of Day
Press Enter to save
 
TIMERS SETTINGS ENTER
2. Select a setting with the left ( or ).
Language
Press Enter to save
   
TIMERS SETTINGS ENTER
3. Change the setting parameter with the right ( or ).
Language
Press Enter to save
 
TIMERS SETTINGS ENTER
4. Press ENTER.
First start up
 
TIMERS SETTINGS ENTER
– The screen changes to Standby mode.
06:30
 
TIMERS SETTINGS ENTER
06:30
 
english
 
french
   
finished
fi8d
 
NTE NTE
 
Home Connect assistant
TM
About Home Connect
The Home Connect wizard is a part of the initial
installation of the appliance on certain models. If the
Home Connect is not installed during the first start-up of
the appliance it may be accessed in the settings menu.
The Home Connect app must first be successfully installed
on a mobile device. See the section "Setting up Home
Connect™" on page 54 for full instructions on how to
install the Home Connect app.
About data protection
When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to the
Home Connect server (initial registration):
• Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed Wi-Fi communication module).
• Security certificate of the Wi-Fi communication
module (to ensure a secure IT connection).
• The current software and hardware version of your
domestic appliance.
• Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.

Setting the oven(s)

Setting the cooking mode and temperature
1. Place rack in desired rack position and shut the door.
2. Turn the MODE knob to BAKE, for example.
3. Turn the TEMPERATURE knob.
06:30
Bake
350
°
  
TIMERS SETTINGS ENTER
06:30
Bake
— — —
  
TIMERS SETTINGS ENTER
°

°

Page. 43