Remote Start - Thermador Pro Harmony Professional Series Use And Care Manual

Remote start

About remote start
Remote start allows you to start, pause, and abort oven
programs remotely via the Home Connect
mobile device.
The remote start can only be employed if the Home
Connect app has been successfully installed on a mobile
device. See the section "Setting up Home Connect™" on
page 45 for instructions on how to install the Home
Connect app.
If the appliance is not connected to the home network,
the appliance functions in the same way as an oven with
no network connection and can still be operated via the
appliance.
The availability of the Home Connect function depends on
the availability of Home Connect services in your country.
Home Connect services are not available in every country.
You can find more information on this at www.home-
connect.com
Some operating modes can only be started on the oven
itself.
Remote start is automatically deactivated in the
following situations:
• The oven door is opened 15 minutes after remote
start is activated.
• The oven door is opened 15 minutes after the oven
operation has ended.
• 24 hours after remote start has been activated.
IMPORTANT:
• Ensure that you follow the safety instructions in this
instruction manual and that you comply with these
even when you are away from home and are operating
the appliance via the Home Connect app. You must
also follow the instructions in the Home Connect app.
• Operating the appliance directly from the appliance
always has priority. During this time, it is not possible
to operate the appliance using the Home Connect
app.
• We are constantly working to improve the Home
Connect app, which may lead to differences in the
TM app on a
setup steps. Please rely on the instructions in the
latest version of the Home Connect app to guide you
through the setup process.
To set remote start
1. Place the food in the oven and then close the door.
2. Turn the mode knob to REMOTE START.
–
–
3. Continue with the Home Connect app installed on
your mobile device.
DO NOT rotate the temperature knob to any
setting (leave in the off position).
Remote Start
switched on
F
 
TIMERS SETTINGS ENTER
The displays turns to the standby screen and
appears in the display.
F
06:30
 
TIMERS SETTINGS ENTER
 
C
 
Page. 38