Using The Push Button Method; Using The Personal Identification Number (Pin) Method; Connecting A Mobile Device To The Printer Wireless Network; Deactivating The Wi‑Fi Network - Lexmark CX331 User Manual

Set up, install, and configure

Using the Push Button method

1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start Push Button Method
2
Follow the instructions on the display.
Using the personal identification number (PIN) method
1
From the control panel, navigate to:
Settings > Network/Ports > Wireless > Wi‑Fi Protected Setup > Start PIN Method
2
Copy the eight‑digit WPS PIN.
3
Open a Web browser, and then type the IP address of your access point in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
4
Access the WPS settings. For more information, see the documentation that came with your access
point.
5
Enter the eight‑digit PIN, and then save the changes.

Connecting a mobile device to the printer wireless network

1
Enable Wi‑Fi Direct
Enable Wi‑Fi Direct.
Notes:
•
The Wi‑Fi Direct SSID and password are generated automatically. To view the Wi‑Fi Direct SSID and
password, go to the Wi‑Fi Direct menu.
•
You can also change the SSID and password, if necessary.
2
Connect your mobile device to the printer wireless network.
Deactivating the Wi‑Fi network
1
From the home screen, touch Settings > Network/Ports > Network Overview > Active Adapter > Standard
Network.
2
Follow the instructions on the display.
Checking the printer connectivity
1
From the home screen, touch Settings > Reports > Network > Network Setup Page.
2
Check the first section of the network setup page, and confirm that the status is connected.
If the status is not connected, then the LAN drop may be inactive, or the network cable may be
malfunctioning. Contact your administrator for assistance.
®
in the printer. From the home screen, touch Settings > Network/Ports > Wireless >
33