Use printer menus
Advanced Imaging
Menu item
Color Balance
Cyan ‑ Red
-4 to 4 (0*)
Magenta ‑ Green
-4 to 4 (0*)
Yellow ‑ Blue
-4 to 4 (0*)
Auto Color Detect
Color Sensitivity
1–9 (5*)
Area Sensitivity
1–9 (5*)
FTP Bit Depth
1 bit*
8 bit*
Contrast
Best for content*
0
1
2
3
4
5
Background Removal
Level
‑4 to 4 (0*)
Scan Edge to Edge
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Admin Controls
Menu item
Text Default
5–95 (75*)
Text/Photo Default
5–95 (75*)
Photo Default
5–95(50*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Adjust the color intensity during scanning.
Set the amount of color that the printer detects from the original document.
Specify the contrast of the output.
Adjust the amount of background visible on a scanned image.
Allow edge‑to‑edge scanning of the original document.
Description
Set the quality of text on a scanned image.
Set the quality of text or photo image on a scanned image.
Set the quality of a photo image on a scanned image.
86